What is the mechanism of the water smooth bearing?

The most important feature of the water smooth bearing is that the motor and the pump are integrated into a single pump. It is a type of pump in which a smooth shaft sleeve is immersed in a groundwater well for pumping and delivering non-oil-supply slider water. It is widely used in farmland irrigation and drainage, industrial and mining enterprises, Urban water supply and drainage and sewage treatment. Because the motor is submerged in water at the same time, the structure requirements for the motor are more special than those of the general motor. The structure of the water-smooth bearing motor is divided into four types: dry, semi-dry, oil-filled, and wet.
Before the pump is turned on, there must be a copper-base steel ball in the suction pipe and pump to hold the liquid. After the pump is turned on, the impeller rotates at high speed, and the liquid between them rotates along with the blades. Under the effect of centrifugal force, it flies out of the impeller and shoots out. The ejected liquid gradually slows down in the pump housing dispersion chamber, the pressure is gradually added, and then the pump exits. , discharge pipe outflow. At this moment, in the center of the blade, because the liquid is thrown around to form a vacuum and low pressure area with no air and no liquid, the liquid in the liquid pool flows into the pump through the suction pipe under the effect of atmospheric pressure at the pool surface, and the liquid is continuously connected. The ground is pumped up from the liquid pool and continuously discharged from the discharge pipe.

The QJR series well heat-resistant submersible pump is a heat-resistant submersible electric pump directly integrated with a well-contained heat-resistant submersible three-phase asynchronous motor. The heat-resistant water temperature is up to 100°C. It is a submerged well and extracts geothermal energy. The water is a useful tool; geothermal is the cheapest, cleanest, and inexhaustible latest power, and is now widely used in heating, medical, bathing, breeding, cultivation, industry and agriculture, factories and mines, entertainment services, health facilities, etc. aspect. It has a pump unity, simple structure, reliable operation, no noise, excellent performance, high unit efficiency, easy device repair; and has many advantages such as heat resistance, anti-corrosion, anti-aging and so on, is the latest product of the embankment to take hot water.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.