What characteristics of copper bushings are in mechanical equipment?

The copper bushing is a component in the mechanical equipment. It is mainly used on the slinger and the sliding self-lubricating bearing is also widely used. The copper bushing is a kind of non-defective part during the use of the mechanical equipment.
Parts, it is mainly used for the production of amorphous single and magnetic materials. The first choice for the copper bushing used in the graphite bushing is the centrifugal casting and die casting. The color of its appearance is mostly blue and yellow. Copper bushings and other mechanical equipment
The same, but also has its own characteristics.

1.Wear resistance
The wear resistance of copper bushings is still relatively good, and the equipment of different raw materials has different characteristics. The copper alloy bushings are still closely related to the internal structure of the copper bushings, and they will not be too lax. There is no air hole trachoma, so from the appearance of the copper bush is still relatively bright, and its color contrast is special. And the most important thing is that its hardness is relatively high.
2. Corrosive
Another feature of the copper bushing is corrosion resistance and corrosion is still outstanding. It is primarily used in the atmosphere and fresh water, because the environment is still relatively good. In the process of using copper bushings, Usually not
It is easy to show a dead-killing condition. The corrosion resistance of copper bushings is mainly reflected in some chemical elements such as: dilute sulfuric acid, hydrochloric acid, fatty acids and other elements, so the corrosion resistance of copper bushings is very good. ,it
The reason why it will not show a deadly situation is still mainly because of its own contrast and its features are good, even if there is no smoothing agent and the water quality of the smooth agent can still perform normal operations in the sliding and self
The smooth function can still get stuck.
3. Compression ability
The compressive strength of copper bushings is also relatively good. Its external pressure is very high and it can very well accept the side pressure of the bearing. In the case of high load pressure, the copper bushing can also be operated.

This is what the copper bushing has some of the most important characteristics. It is also a good comparison between its forging function and cutting function. Therefore, the copper bushing is still a good component.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.