The lubrication maintenance method of the whole eccentric arm bearing

    Hunan Jintai Hardware and Machinery Co., Ltd. Lubrication maintenance contents of the overall eccentric rotary bearing include monitoring of working conditions, making up for or replacing lubricants, and regular inspections. As a maintenance item at work, there are rotation noises, vibrations, temperatures, and conditions of lubricants of all the tumbler arm bearings.
    Oil bearing lubrication
Oil bath lubrication is a common method of lubrication in imported bearings and is suitable for lubrication of low and medium speed bearings. The FAG bearing part is immersed in the groove, the lubricating oil is carried by the rotating bearing part, and the oil surface flowing back to the oil groove should be slightly lower than the center of the lowest roll body.

    2. Dropping lubrication of bearings
Dripping oil lubrication is suitable for bearing parts that require quantitative oil supply. A single drop of oil every 3-8 seconds is appropriate. Excessive oil volume will cause the temperature of all the bearings of the tumble arm to increase.
    3. Bearing cycle oil lubrication
The filtered oil is sent to the bearing parts with an oil pump, and the oil after passing through the FAG bearing is filtered and cooled before being used. Since the circulating oil can take away certain heat and cool the bearing, this method is actually used for bearing components with higher rotational speed.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.