The right way to clean slide bearing, do you know?
2015-09-16
Slide bearing maintenance and maintenance work are equally important, in the maintenance, technical personnel will be cleaning this link in sliding bearing, don't look down upon slide bearing cleaning this link, if taken, may cause damage in slide bearing and abrasion or corrosion.The following in order to avoid in the process of cleaning the slide bearing don't loss, give you some correct methods and Suggestions.
1, the import of slide bearing will be removed when check, use methods such as photography first and then record the appearance.
2, in addition, to confirm the amount of residual lubricant and lubricant sampling, and then wash the slide bearing.
3, slide bearing cleaning rough washing and fine washing, can be put in use at the bottom of the container and on the metal frame.
1), coarse, washing oil using a brush to remove grease or adhesive.If at this time in oil rotating slide bearing, pay attention to the rolling surface due to foreign bodies such as damage.
2), fine cleaning, slowly turn the slide bearing in the oil, must be carefully.
4, usually use detergent to neutral aqueous diesel or kerosene, according to the need to sometimes use warm lye, etc.No matter use which kinds of detergent, often should filter clean.
5, clean immediately after the coating on the slide bearing anti-rust oil or antirust grease
(Chat Online)
