Rotating machinery bearing

 Rotating machinery bearing vibration monitoring method

Fan vibration monitoring instrument, it is a dual channel vibration monitoring instrument, two channel construction machinery bearings work independently, independent, according to their respective input signals from the sensors in the two vibration velocity.

Users can to the combination of different measurement of two channels, can bearing co., LTD. Is the same position of the horizontal and vertical two points, also can be two different position, also can through the terminal after the independence of relay "and" and "or" logic.

For many small and medium sized rotating machinery especially the machinery with ball bearing vibration are more likely to spread to the shell (axis), it is an ideal fan monitoring protection instrument.

Machine condition damage, damage to the machine, and is the development of the imported bearing in the process of the running of the machine can be in the form of fault symptoms for identification. Information transfer by mechanical vibration is one of them, and nearly all mechanical damage will produce too much vibration. Bearing model query software

In all types of vibration, the absolute bearing vibration is one of the most easy to be measured, is refers to the chassis (bearing and bearing) relative to the space fast vibration of fixed reference points. Can use the speed sensor or piezoelectric acceleration sensor to measure the horizontal and vertical direction of in the chassis.

Simple and easy to install these sensors, only need a screw. So the absolute bearing vibration monitoring is the most basic and most of the rotating machinery is the most extensive protection. Below is measurement on the main bearing of the fan when the horizontal, vertical and axial bearing vibration absolutely recommend measuring position.