Inlay type of self-lubricating bearings used in composite material is a new kind of extreme pressure lubrication materials, solid by the metal substrate and the embedded holes or slots in the solid lubricant paste.Metal substrate in the process of frictio

It is generally believed that sealed rolling bearing grease filling amount, shall not be more than about 50% of the internal space, ball bearing, 20% to 30% in the most appropriate.

If you don't see the poster of this group of bearing design, can't think of can be so free expression, the colors of different environment with image synthesis, everywhere is full of power of passion.Lovely of bearing suddenly become individual characte

Oil bearing characteristics Made of porous material and pore of sliding bearing with embellish lub oil storage.Porous material and the thermal expansion coefficient of lubricating oil is different, so the work of oil from the hole JDB cast iron surface e

Bimetal bushings for carbon steel substrate, bimetallic bearing is one of the bearing lubrication system, the product is high quality low carbon steel back as matrix, bronze alloy on the surface, through several high temperature sintering and density and

DU composite bushing/rolled collar, is based on steel substrate, the middle bronze powder, sintered spherical surface rolling a mixture of polytetrafluoroethylene (PTFE) and lead (pb), rolling and sliding bearing, the general surface tin exports (silver).

As is known to all, bearing materials is the core and soul of a machine, chose the suitable material, can increase the productivity of the machine and the quality of the product, but if you choose the poor quality of materials, the light affects the quali

1, the overall plastic bearings are lubricating material, long service life.The metal sliding bearing lubrication layer is only 0.003 mm of PTFE surface, thin layer when the friction after it proclaims the end of the service life;2, plastic bearings use w

Easy to rust, easy to corrosion of metal is a well known phenomenon, therefore, metal rust is imperative.The following is a bearing engineer for bimetal bearing rust prevention methods

Slide bearing maintenance and maintenance work are equally important, in the maintenance, technical personnel will be cleaning this link in slide bearing, don't look down upon slide bearing cleaning this link, if taken, may cause damage in slide bearing

Generally speaking, bearing and bearing seat sliding bearing.Sliding bearing according to the direction of the load, it can be divided into radial sliding bearing (mainly bear radial load) and the thrust bearing (mainly bear axial load).The structure of c

Bimetal bearing belongs to the precision parts, so when use requires a fairly cautious attitude, so is the use of the high performance of flanged bimetal bushing, if use undeserved, also cannot achieve the expected performance effect, and easy to make the

The bearing quality testing situation of two standard parallel and quality is high level of the Z standard of the bearing, with the "V" when testing may not have a good quality performance, there is no corresponding relationship between both.In the bear

Solve the problem of bearing noise, need to know is the cause of the noise, a variety of reasons cause bearing made a big noise, depending on is just install or run a long time to cause bearing noise?

Generally speaking, bearing damage for the cause of fatigue damage, bad lubrication and contaminants into the bearing improper handling or installation.The following Is a method to prevent bearing damage, did you use?

Currently used various machinery industry is the most or the ball bearing, needle roller bearings and so on, but a small number of self-lubricating bearings has

The difference between metal composite bearings and plastic bearings

Bearings are precision parts, so when using begged have fairly cautious attitude, the change is to use high performance bearing, assume that improper use, also can't reach the expected performance effect, and easy to make the bearing damage. So, using th

DU bearing was developed in Germany. Now this type of self lubricating bearing was wide used in all kinds of industries.

A plain bearing (in railroading sometimes called a solid bearing) is the simplest type of bearing, comprising just a bearing surface and no rolling elements.

A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications;

Jintai export CY-25FL ball transfer unit bearings all American. mainly used in conveyor parts, mold workbench, material turnover table, logistics system equipment,etc.