Bearing installation must be dry, clean environment conditions. Care should be taken before installation to check the mating surfaces of the shaft and housing sliding self-lubricating bearings, the end faces of the shoulders, the machined quality of the g

Double row angular contact ball bearings have limited tilting between the inner and outer rings, allowing graphite-lined greased bearings to be tilted at an angle that depends on the bearing's internal clearance, bearing size, internal design, and force

In the field of valve applications, bushings within the valve cover, wrapped stem, the general composite bearing PTFE or graphite and other corrosion-resistant materials, used for sealing.

Bearing installation and bearing removal (bearing cold installation, bearing thermal installation, bearing hydraulic installation):

Before assembly, make sure that there is no foreign matter on the surface of sleeve and seat hole. The surface of seat hole should be clean with water-lubricated sleeve to avoid scratching during assembly.

The bearings for rotary movement are designed as rolling bearings or plain bearings. As for the parts can be generated between the 6014 cross axis of the mobile force is transmitted through the rolling or sliding components are different.

In addition to the small friction coefficient between the friction bearings and the wear resistance, the following points should also be satisfied:1. Should have sufficient compressive strength, anti-fatigue strong automotive liner degrees and withstand t

When custom bearing, the friction should be selected good sliding bearing materials, bearing bush, suitable lubricant And the use of appropriate supply methods to improve the structure of the bearing for thick film lubrication.

With the porous material as the matrix, impregnated with solid lubricant, constitute a solid lubricating impregnated composite bearings, solid lubricants stored in the bearing pad with the bearing wear and tear to the friction surface of solid lubricants.

Composite bearings are based on porous materials, impregnated with solid lubricants, constitute a solid lubricating impregnated composite bearings, solid lubricants stored in the bearing pad with the bearing wear and tear continue to supply friction to th

2017 AUTOmechanika Exhibition Date:29 Nov.-2 Dec.,2017,Shanghai National Covention Center Area B7.2 Hall N50.Hunan Jintai Hardware and Machinery Co.,Ltd.Sliding bearings,Adapter Sleeve,Withdrawal sleeve,etc.China Asia.

2017 Power Transmission Exhibition Time:2017.10.31-2017.11.03,Address:Shanghai New International Expo Center,N4 Hall D1-5B.Hunan Jintai Hardware and Machinery Co.,Ltd. Sliding Bearing.

Self-lubricating block bearing with high carrying capacity, impact resistance, high temperature, self-lubricating ability and other characteristics, especially for heavy load, low speed.

Self-lubricating bearing block solution:1. Meet the requirements of strict and also require free maintenance;2. Use for a long time under the condition of self lubrication, satisfies the requirement of cost control.

The bearing is a rotating part that supports the journal or shaft.According to the working principle of the bearing can be divided into: rolling friction bearings (rolling bearings) and sliding friction bearings (sliding bearings).

sliding bearings in the design of bearings, should be used to improve friction and friction bearing material bearing.

Composite bearings with its high rotation accuracy, good steel, high bearing capacity, no wear, high durability. The following is the static pressure NTN bearings in the maintenance process to explore and try to get some experience, for your reference.

When design sliding bearings, should be used to improve the friction of a good sliding bearing material bearing, the appropriate lubricant And the use of appropriate supply methods to improve the bearing structure to obtain thick film lubrication.

Solid self-lubricating bearings are mainly JDB-1, SF-1, FB09G, and other series of bearings, in the initial stage of the work gradually through the wear and tear self-lubricating material gradually transferred to the surface of the grinding parts of the s

The most important part of the machine is the bearing sleeve, sliding bearing sleeve is very good, the quality is very good, then the bearing sets how to produce it?

Sliding bearing is surface contact, so the contact surface to maintain a certain oil film, so the design should pay attention to the following questions:1, to make the oil film can smoothly into the friction surface.

Sliding bearings can also be said that when other parts in the shaft relative to each other when the relative movement, used to reduce the power transmission process of friction coefficient and keep the axis of the central position of the fixed parts.

Oil-free bearings (SF-1) is a combination of metal bearing characteristics and oil-free characteristics of the new lubricating bearings, from the metal matrix to withstand the load, special formula of solid lubricating material from the lubrication.

The use of sliding bearings is also very extensive, such as printing presses, textile machines, tobacco machinery, micro-motor, cars, motorcycle dry bearings and agricultural machinery and so on.

Self-smooth joint bearings can be divided into self-smooth radial joint bearings, self-sliding contact bearings, self-sliding thrust bearings and self-smooth rod end bearings.