The marble static pressure saw has poor working environment, the product requires high reliability, long service life, and difficult maintenance; in order to meet the use and life expectancy of the rotating parts through bushing of marble static pressure

The smelting machinery has high working temperature, poor lubrication conditions and difficult maintenance. In order to meet the requirements of the smelting machinery manufacturers for the use and life of rotating parts through sleeves.

Graphite copper sleeve is a product with alloyed copper as the base and graphite particles embedded on it. In general, people will also call it copper-graphite bearings, self-lubricating copper bushings, embedded graphite bushings, JDB bearings, and so on

Ball screw copper bushings are generally based on the use of aluminum bronze and tin bronze, such as ZQAl9-4, ZQSn10-1. When the ball screw copper bushing is installed, due to the need to place the ball, the accuracy of the product itself is more stringen

The graphite copper bushing has a much better lubrication effect than the ordinary copper bushing because the graphite particles embedded in the graphite copper bushing will produce a layer of graphite particles between the products, which plays a role in

Hunan Jintai Hardware and Machinery Co.,Ltd. Export CuSn8 bronze bushings to Hungary,use material:CuSn8. Wrapped Bronze Bearing for reciprocating movement of mechanical parts and hydraulic rods.

As long as you find aluminum bronze products with mechanical properties that can meet your design requirements, you can solve the problem of raw rust.

Compared to ordinary copper bushings, high-strength bushings are more adaptable to harsh working conditions, high load carrying capacity, impact resistance, and higher reliability of use. Very long.

Export sliding bearings for reciprocating movement of mechanical parts and hydraulic rods to Iran.Material:Steel + copper powder + (PTFE+Pb+ polymer).

The aluminum bronze graphite copper sheath produced by our company can solve the above problems well. With aluminum bronze as the substrate, the graphite copper sheath product with graphite particles embedded in the product can work well in long-term work

ZCuSn6Zn6Pb3 copper bushing products are made of tin bronze alloy and precision machining through centrifugal casting. They have very good running and wear-resistance characteristics.

Hunan Jintai Hardware and Machinery Co.,Ltd. Export SF-1 Du Bushes /SF-1 composite bearing/ Du Oilless bearings /SF-1 copper sleeve DX Maginal Bushing,Multilayer Bearing to India,Use for machinery.Sliding bearings for reciprocating movement of mechanical

Steelmaking equipment such as converters in the metallurgical industry use graphite copper sleeves and graphite guide plates in some rotating parts. They work well under high temperature and high pressure working conditions, and are easy to maintain witho

Hunan Jintai Hardware and Machinery Co.,Ltd. Export SF-2 Dx Bushes to Russia,Use for machinery.Material:Steel + copper powder + (PTFE+Pb+ polymer).

The materials of ZCuSn10P1 tin bronze sleeves corresponding to foreign brands are: American Standard No. C90700, British No. PB4, Japanese No. PBC2B and International Standard CuSn10P.

Hunan Jintai Hardware and Machinery Co., Ltd. is a professional manufacturer of various grades of copper alloy products such as national standard ZCuZn25Al6Fe3Mn3 high strength brass.

The tin bronze ZCuSn10P1 copper alloy has high hardness, good abrasion resistance, and is less likely to cause seizure. It can be used for wear parts with high loads and high sliding speeds, such as connecting rods, bushings, and bearing bushes.

Hunan Jintai Hardware and Machinery Co.,Ltd. Export FB090 Wrapped bronze plain bearing metric to Indonesia and Egypt,Use for machinery.

The requirements for the performance of the water pump bearing mainly include the following: high speed, hundreds to thousands of revolutions per minute, allowing water lubrication, good anti-rust performance, and long wear-resistance.

Hunan Jintai Hardware and Machinery Co.,Ltd. Export Copper Flanged Bimetal Bushing to Indonesia and Egypt,Use for truck.

According to the working environment of the harvester and the specific requirements of different parts of the harvester bushing, bimetal bushings, composite bushings and graphite bushings can be selected.

Today Hunan Jintai Hardware and Machinery Co.,Ltd. Export FB092 Rolled wrapped Bronze Bushings Metric to Sweden.Quantity: 2600,Use for machinery.

Jintai has many experience in the production and supporting of dryer liners. It has accumulated many successful cases and can help customers to choose more suitable dryer liner products to achieve better use performance and more. Good use effect.

Today Hunan Jintai Hardware and Machinery Co.,Ltd. Export 50 Pcs DX SF-2 Bushings to Manitoba, Canada.Material:Steel + copper powder +POM.Email:sales@slide-bearing.com

According to the different requirements of garden machinery bushings for special working environment and different working positions of garden machinery, we can choose different products such as graphite copper bushings, composite bushings and bimetal bus