Copper Sleeve Bushing Characteristics and effect in the mechanical equipment

The copper set of features is high hardness, excellent wear resistance, not easily get killed, good casting and machining functions, in the air and water, and have excellent corrosion resistance.Can oil groove sheath (below 20 mpa) in high load and high sliding speed (8 m/s) under the operation of wear-resistant parts, such as connecting rod, bushings, bearings, gears, worm gear, etc.
Copper set of features:
Compressive ability: copper set of contrast compressive ability is good, it looks a lot of pressure, can MPTZ flange size oil-free bushings excellent accept bearing lateral pressure, pressure in the high load condition of copper bushing can operate, used in situations of low speed and heavy loading.
Corrosion resistance: copper bushing is another feature of corrosion resistance, excellent corrosion function.Its important application in the air and water, as a result of this environment is still relatively good.In the process of using the copper bushing, usually not easy to present the status of the killed.Copper corrosion the primary function of the lining sleeve for the excavator arm sheath on some chemical element, its feature comparison, even in the absence of lubricant and water quality lubricant industry situation still can be normal, in the function of the sliding resistance and self-lubrication can still insist on.

Abrasion resistance, wear resistance of copper set of functions is still a good contrast, is not the same as the raw material of equipment with different characteristics.Brass parts internal arrangement is still tight, won't appear too lax, it is no stomata trachoma, so from appearance looks copper bushing is still bright contrast, its color contrast is special.And most important is its hardness is also relatively high contrast.
The effect of the in copper set of machinery and equipment:
Copper bush in what is now the comparison of the widely used in machinery and equipment.Copper collar has many effects in the machinery, for example, can make its cuts in conflict, cut, cut noise and so on, these are the copper bushing in machinery to effect.Copper set in the current market has been increasing in use, it is also compared to trust.In the process of mechanical operation, as a result of the long-term conflict caused by the wear parts, this time is needed to use to the copper bushing.Because it can help them reduce conflict.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.