Analysis of lubricant bearing replacement steps

The details of the lubricant bearing replacement procedure are as follows:

1. Loosen the seven fixed oilless sliders on the motor base and fix the bolts and remove the motor base.

3. Loosen the four fixing bolts of the vibration motor and remove the vibration motor with a water-lubricated shaft sleeve (it is not necessary to disassemble the hose on the motor).

3. Loosen the eight fixing bolts on the bearing plate and the bearing housing and the copper-base steel balls to keep the bolts connecting the ring support plate to the front frame, and remove the bearing plate together with the shock absorber and bracket.

4. Loosen the eight fixing bolts on the SKF bearing plate and remove the plate.

5. Find a plate with a smaller diameter than the inner ring of the SKF bearing and place it on the shaft head of the outer bearing block.

6, in order to lock the seven bolts in the order of the diagonal, you can pull out the bearing and SKF bearings. After the bearing is turned flat, you can replace the model φ180×220×18. Skeleton oil seal.

7. Remove the left end cover and place the back cover on the backing plate. Look for seven M12×70 bolts to fasten the left end cover and the traveling bearing seat.

When installing, pay attention to the disassembly sequence of each part and install it in reverse order. More butter must be applied to the skeleton oil seal, the drive bearing seat and the outer bearing seat so as not to damage the oil seal when press-fitting, resulting in oil leakage failure again.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.